|
The i-socket
110m will automatically turn on the Wet/Dry vacuum or dust collector when the tool is powered on and continue running for an additional 7–seconds to clean out the inlet pipe after the tool is powered off.
Every cut, every time! How many times have you been on-site or working
in the shop and have a vacuum system attached to the dust port of your tool? In
the past, connecting a vacuum to your Miter saw, sander or table saw helps save
a lot of clean up time and eliminate airborne sawdust. The only problem was
remembering to power on and off the vacuum during every cut. Or you could always
leave the vacuum running continually, which is annoying and would drastically shorten the life of the vacuum motor.
The i-socket
110m can save you the extra step of remembering to turn on and off the
wet/vacuum or dust collector. Works with any standard 15Amp, 125 Volt
house
outlet. Can be used with any 15Amp rated/125 V power tool, miter saw, sanders, table saw,
router.... any tool with a dust collection port or a any tool you want to
control with another.
Let the i-socket
110m automatically do this job for you!
|
