i-Socket Classic Plus

$39.95

This is the third generation of the i-Socket Autoswitch that we are in the process of introducing and features a 0.6 amp actuation threshold, allowing lighter-powered tools to be used.

Category:

Product Description

Tool Port:

  • Max. motor rating should not exceed 120v, 15amps, 60 Hz, 1875 Watts
  • Table saws from portable to contractor type
  • Miter Saws both 10” and 12”
  • Any hand sander palm, DA, belt sander
  • Routers
  • Portable joiners or planers

Vacuum Port:

  • Any standard shop type vacuum will run on the i-Socket
  • Vacuum motor HP should not exceed 1875 Watts
  • Dust collector motor should be rated at 120v/15amps and HP should not exceed 1875 Watts
  • Power feeders can also be controlled from the vacuum port

Example of the most common configurations:

Tool Port: 12” Compound Miter Saw rated at 120v/13.2 amps
Vacuum Port: Shop type wet/dry vacuum at 6.5 hp “Peak” rated at 120v/11 amps
OR
Tool Port: Contractors table saw rated at 120v/13.4 amps
Vacuum Port: Dust collector rated at 120v/15 amps

Variable Speed Motor Controls (VSMC):

VSMC will not trigger the i-Socket Autoswitch vacuum port at the LOW speed settings. The i-Socket Autoswitch was designed this way in order to comply with UL safety standards.

Vacuum Outlet:

DO NOT use any form of cutting tool on the vacuum outlet. Although the cutting tool will function properly it is extremely dangerous to have a cutting tool automatically triggered.

Reviews

There are no reviews yet.

Be the First to Review “i-Socket Classic Plus”