i-Socket Versatile Basic


The i-Socket Autoswitch is not intended for commercial use. It was designed to be used in the home workshop on a standard 120v/15amp house outlet. If used on a 20amp breaker the i-Socket Autoswitch will function properly but all tool and vacuum standards must still comply with the 120v/15amp ratings.


Product Description

Tool Port:

  • Max. motor rating should not exceed 120v, 15amps, 60 Hz, 1875 Watts
  • Table saws from portable to contractor type
  • Miter Saws both 10” and 12”
  • Any hand sander palm, DA, belt sander
  • Routers
  • Portable joiners or planers

Vacuum Port:

  • Any standard shop type vacuum will run on the i-Socket
  • Vacuum motor HP should not exceed 1875 Watts
  • Dust collector motor should be rated at 120v/15amps and HP should not exceed 1875 Watts
  • Power feeders can also be controlled from the vacuum port

Example of the most common configurations:

Tool Port: 12” Compound Miter Saw rated at 120v/13.2 amps
Vacuum Port: Shop type wet/dry vacuum at 6.5 hp “Peak” rated at 120v/11 amps
Tool Port: Contractors table saw rated at 120v/13.4 amps
Vacuum Port: Dust collector rated at 120v/15 amps

Variable Speed Motor Controls (VSMC):

VSMC will not trigger the i-Socket Autoswitch vacuum port at the LOW speed settings. The i-Socket Autoswitch was designed this way in order to comply with UL safety standards.

Vacuum Outlet:

DO NOT use any form of cutting tool on the vacuum outlet. Although the cutting tool will function properly it is extremely dangerous to have a cutting tool automatically triggered.


There are no reviews yet.

Be the First to Review “i-Socket Versatile Basic”